Sale Sold out
LEWITT BEATKIT PRO Professional 7-Piece Drum Microphone Set
Original price was: €1,098.00.€1,068.00Current price is: €1,068.00.
Out of stock
Description
LEWITT BEATKIT PRO Professional 7-Piece Drum Microphone Set
The BEATKIT PRO is a premium 7-piece drum microphone set that offers everything you need for professional setups and sound quality in the studio or on stage. It comes in a super-sturdy mil-spec transport case with room for all included microphones, mounts, clamps, and windshields. Never was there a more complete pro package.
- 1x DTP 640 REX – Kick drum microphone with two phase-aligned capsules, dynamic and condenser
- 1x MTP 440 DM – Snare microphone with incredibly lively and punchy snare sound
- 3x DTP 340 TT – Tom microphones with supercardioid pattern for clean and accurate drum sound
- 2x LCT 140 AIR – Overhead stereo set with two sound characteristics and excellent transient response
Specifications | |
|---|---|
DTP 640 REX | Kick drum microphone with two capsules. |
| Type | Dynamic, moving coil, Condenser, permanently polarized |
| Acoustical operating principle | Pressure gradient transducer |
| Transducer Ø | 31.7 mm, 1.25 in |
| Transducer Ø | 22.4 mm, 0.88 in |
| Polar pattern | Cardioid |
| EFR, ‘Enhanced Frequency Response’ settings | |
| Sensitivity, = // = FFR | 0.4 mV/Pa (-69 dBV), dynamic 2 mV/Pa (-54 dBV), condenser |
| Sensitivity, + // = Dynamic EFR | 0.4 mV/Pa, -69 dBV/Pa, dynamic 2 mV/Pa, -54 dBV/Pa, condenser |
| Sensitivity, + // + Dual EFR | Condenser and dynamic matched at 1 mV/Pa, -60 dBV |
| Self-noise | 28 dB (A) |
| Max. SPL for 0.5 % THD | 150 dBSPL, 0 dB attenuation |
| Dynamic range of mic. amp. (condenser) | 122 dB |
| Pre-attenuation pad | 0 dB -10 dB -20 dB |
| Rated impedance dynamic | 500 Ω |
| Rated impedance condenser | 200 Ω |
| Supply voltage | 48 V ± 4 V |
| Current consumption | 2 mA |
| Connector | Gold plated 3-pin and 5-pin XLR |
| Cable | 1.5 m (4.95’) dual shielded Y-cable, 5-pin XLR into two 3-pin XLRs |
| Microphone dimensions | 71 dia. x 158 mm, 2.8 dia. x 6.2 in |
| Microphone net weight | 755 g, 27.3 oz |
MTP 440 DM | Punchy sound for drums and amps. |
| Type | Dynamic, moving coil |
| Acoustical operating principle | Pressure gradient transducer |
| Polar pattern | Cardioid |
| Sensitivity | 2.5 mV/Pa, -52 dBV/Pa |
| Internal impedance | 500 Ω |
| Connector | Gold plated 3-pin XLR |
| Microphone enclosure | Zinc die cast |
| Microphone dimensions | 39 dia. x 159 mm, 1.53 dia. x 6.25 in |
| Microphone net weight | 280 g, 9.88 oz |
DTP 340 TT | Perfect for toms and percussion. |
| Type | Dynamic, moving coil |
| Acoustical operating principle | Pressure gradient transducer |
| Polar pattern | Supercardioid |
| Sensitivity | 1.4 mV/Pa, -57 dBV/Pa |
| Internal impedance | 500 Ω |
| Connector | Gold plated 3-pin XLR |
| Microphone enclosure | Zinc die cast |
| Microphone dimensions | Ø 41 dia. X 94 mm, Ø 1.6 dia. X 3.7 in |
| Microphone net weight | 165 g, 5.82 oz |
LCT 140 AIR stereo pair | Versatile recordings in perfect stereo. |
| Type | Condenser, permanently polarized |
| Acoustical operating principle | Pressure gradient transducer |
| Transducer Ø | 17 mm, 0.67 in |
| Diaphragm | 3 micron gold sputtered Mylar |
| Polar pattern | Cardioid |
| Frequency range | 20 … 20,000 Hz |
| Sensitivity | 14.6 mV/Pa, -36.7 dBV/Pa |
| Self-noise | 20 dB (A) |
| Max. SPL for 0.5 % THD | 135 dBSPL |
| Dynamic range | 115 dB (A) |
| Attenuation | 0 dB -12 dB |
| Low-cut filter | linear 80 Hz (12 dB/oct) |
| Internal impedance | 173 Ω |
| Supply voltage | 48 V ± 4 V |
| Current consumption | 7.2 mA |
| Connector | Gold plated 3-pin XLR |
| Microphone dimensions | 24 dia. x 140 mm, 0.9 dia. x 5.5 in |
| Microphone net weight | 66 g, 2.3 oz |
Additional information
| Weight | 1.8 kg |
|---|---|
| Brand | LEWITT |
You May Also Like
Sale
LEWITT CONNECT 2 USB-C Audio Interface
Original price was: €219.00.€215.00Current price is: €215.00.
Sale
